CVT Transmissions used in Peugeot vehicles
Oil Cooler kit.
This kit contains Cooler unit, Hoses,Hose clips,and brackets.
Oil Cooler Heat exchanger used on severall vehicles with a JF011 CVT
Oil Pump JFo11 CVT Transmission.
This is good used pump which has been cleaned and tested.
Oil Pump Relief valve.
This valve is a New design and made from a harder material and will not scratch.
The previous design was to soft and did seize up in the bore
This overhaul kit can be used in several vehicles which use this transmission. JF011/JF016 ( REOF10 a/e/d/f)
The set contains
All oil seals
Drive shaft seals
All internall parts for the valve body
Primary Pulley.( Remanufactured )
This pulley is complete overhauled with new seals and a new bearings
The main bearing is the one with OD 101 mm and ID 65 mm and W 17 mm
The support bearing is the one with OD80mm ID 40 mm and W 16mmThese pulleys do...
Primary Pulley Main Bearing
This bearing is fitted in the main housing
The dimensions are
ID 60 mm OD 101 mm W 17 mm
It has a Circlip around the outer race
Primary Pulley Support Bearing
This bearing is situated in the Back cover of the CVT transmission.
The Dimensions are.
OD 80 mm
ID 40 mm
W 16 mm
The following parts are in this Masterkit A
1 CVT Variator kit ( 2 remanufactured Pulleys with Bearings and 1 new CVT Pushbelt )
1 Oil filter External
1 Oil filter Internal.
1 Overhaul kit ( All seals and Gaskets )
4 FW frictions and 3...
Reverse Clutch Steel Plates used in the following CVT Transmissions.
JF 10 (REOF9) Nissan
JF 011 (REOF10) Nissan, Mitsubishi,Renault,Peugeot, Suzuki,Chrysler,Dodge and Jeep and More.
JF 016 and 17 (CVT8)Nissan, Mitsubishi,Renault,Peugeot,...
Complete Remanufactured Secondary ( Driven ) Pulley
When ordering this pulley you will receive it with a Gear fitted.
Check if the gear got the right diametre and right amount of teeth
There are 4 different gears possible 28,29,30 and 31
Secondary Pulley Main Bearing
This Roller Bearing exist out of 3 items Main casing, Inner Sleeve and Back plate.
The Dimensions are,
OD 80 mm
ID 32 mm
W 18 mm