CVT Transmissions used in several Deawoo cars
Complete Differential unit for Mini VT1-27 CVT Transmission.
This unit is second hand and is in very good condition
This Push belt is the most common used belt and is used in several different CVT Transmissions
It is used in Jatco CVT transmissions, ZF CVT transmissions, Aisin Warner and lots more
It is a replacement for the following CVT Pushbelt numbers...
NS2 CVT OIL ( 4 liter Can )
This oil have to be used in the CVT Transmissions from Jatco: Till 2010
The Jatco CVT Transmissions are
All Nissan CVT Transmissions REOF06, (JF006), REOF08 A and B (JF009), REOF09 (JF010) ...
Original Friction disc for BMW Mini CVT Transmission.
This friction is used for the reverse and Forward Clutch 3 in each cluch pack
This is the Input shaft including the planetarian set of the Mini CVT Transmission
Internal Oil Filter
Oil pressure solenoid which is fitted on the valve body (Hydraulic controlunit )
This oil pump is in a very good condition and has been tested.
Complete Overhaul kit for the transmissions mentioned.It contains all seals,O-rings, Lip seals,Driveshaft seals,Input shaft Seal and Sump gasket
This Pitot pipe is situated in the housing and you can easely brake it when you split the case.
It can also be called a mechanical speed sensor and it is feeding oil in the valve body together with the pitot pipe fitted in the oil pump.
Don't try to...
This Needle bearing is fitted in the front housing
It is also called the Inputshaft bearing
This bearing is situated in the main housing behind the oil pumpIf this bearing is worn very badly it can do a lot of damage to the oil pump.