This a compact and very reliable transmission used in several other cars like Nissan Renault Mitsubishi and more.
Is capable of towing and very low in fuel consumption.
Primary Pulley Support Bearing
This bearing is situated in the Back cover of the CVT transmission.
The Dimensions are.
OD 80 mm
ID 40 mm
W 16 mm
The following parts are in this Masterkit A
1 CVT Variator kit ( 2 remanufactured Pulleys with Bearings and 1 new CVT Pushbelt )
1 Oil filter External
1 Oil filter Internal.
1 Overhaul kit ( All seals and Gaskets )
4 FW frictions and 3...
Reverse Clutch Steel Plates used in the following CVT Transmissions.
JF 10 (REOF9) Nissan
JF 011 (REOF10) Nissan, Mitsubishi,Renault,Peugeot, Suzuki,Chrysler,Dodge and Jeep and More.
JF 016 and 17 (CVT8)Nissan, Mitsubishi,Renault,Peugeot,...
Complete Remanufactured Secondary ( Driven ) Pulley
When ordering this pulley you will receive it with a Gear fitted.
Check if the gear got the right diametre and right amount of teeth
There are 4 different gears possible 28,29,30 and 31
Secondary Pulley Main Bearing
This Roller Bearing exist out of 3 items Main casing, Inner Sleeve and Back plate.
The Dimensions are,
OD 80 mm
ID 32 mm
W 18 mm
Secondary Pulley Support Bearing.
This bearing is situated in the back cover of the CVT transmission.
This is an open bearing and is special made for us by NSK
The Dimensions are:
OD 90 mm
ID 45 mm
W 17 mm
This steppen motor is very expensive and before you order check the following.
95% of the time there is nothing wrong with the steppen motor so get it diagnosed properly first.
The resistance of this steppen motor meassured between the...
4 Tapered roller bearing for Both secondary shafts and Diff unit
Tapered Roller Bearing Kit ( 2WD )
This Bearing kit is only for a two wheel drive vehicle.
There are 4 Bearings in it.
JF 011 Solenoid set Containing 4 Solenoids