CVT Transmission used in Citroen vehicles
Internal oil filter including O-ring
The following parts are in this Masterkit C
1 CVT Push belt CVT1047/1066
1 Oil filter External
1 Oil filter Internal.
1 Overhaul kit ( All seals and Gaskets )
1 Main Beaing Kit ( 3 Bearing with the sizes 60 x101 x 17...
This service kit contains 1 Sump gasket. 1 Internal oil filter and 1 External oilfilter cartridge which is situated behind the heat exchanger which is fitted on the front of the transmission
Main Bearing Kit JF011 CVT used in several Vehicles.
It contains 3 most common failing bearings .
Primary pulley main bearing. Dimension 60 x 101 x 17.2
Secondary pulley support bearing.Dimension 45 x 90 x 17
Primary pulley support bearing ...
Set of Moulded Pistons for JF011 ( REOF10 ) CVT Transmission
Contains 2 Forward Pistons and 1 Reverse Piston
NS2 CVT OIL ( 2 liter Can )
This oil have to be used in the CVT Transmissions from Jatco: Till 2010
The Jatco CVT Transmissions are
All Nissan CVT Transmissions REOF06, (JF006), REOF08 A and B (JF009), REOF09 (JF010) ...
Oil Cooler Heat exchanger used on severall vehicles with a JF011 CVT
Oil Pump JFo11 CVT Transmission.
This is good used pump which has been cleaned and tested.
Oil Pump Relief valve.
This valve is a New design and made from a harder material and will not scratch.
The previous design was to soft and did seize up in the bore
This overhaul kit can be used in several vehicles which use this transmission. JF011/JF016 ( REOF10 a/e/d/f)
The set contains
All oil seals
Drive shaft seals
All internall parts for the valve body
Primary Pulley.( Remanufactured )
This pulley is complete overhauled with new seals and a new bearings
The main bearing is the one with OD 101 mm and ID 65 mm and W 17 mm
The support bearing is the one with OD80mm ID 40 mm and W 16mmThese pulleys do...
Primary Pulley Main Bearing
This bearing is fitted in the main housing
The dimensions are
ID 60 mm OD 101 mm W 17 mm
It has a Circlip around the outer race